Processing of Metals, Metallic Materials & Metal Matrix Composites On the use of Titanium Alloys for Aerospace and Non-Aerospace Applications Processing of Metal Matrix Composites for Automotive Applications : Challenges and Prospects Recent Trends in Production, Processing and Applications of Shape Memory Alloys Fabrication and Processing of Magnesium Sheets Challenges in the Processing and Fabrication of Novel Phosphoric Irons Continuous Severe Plastic Deformation (CSPD) Processing of Aluminum Alloy 6061 Some Studies on Quaternary Additions of Zinc, Iron & Cromium on Copper-Aluminum Manganese Shape Memory Alloys Fabrication of Multi-material Components by Laser Rapid Manufacturing and their Characterization Melting and Solidification Behaviour of Pb-Sn Alloy Nano-Particles Embedded in Quasicrystalline Matrices Properties and Characteristics of Mg-Al Blended and Compacted Composites

Part 2:

Behaviour of Metals, Intermetallics and Metal Based Composites Effect of Cross-sectional Geometry and Solute Content on the Tensile Properties of High Pressure Die Cast Mg-Al Alloys Mechanical Properties of Alumina-Zirconia Nanocomposite (Nano ZTA) Fabricated by Gelcasting The Intrinsic Influence of Nano-length Scale Metal and Ceramic Reinforcements on Strength, Ductility and Work of Fracture of Magnesium The Microstructure and Hardness of Aluminum Oxide Prepared by Consolidating Powders by the Technique of Plasma Pressure Compaction Fracture Toughness and Fatigue Crack Growth Characterization of Laser Rapid Manufactured In-625 Cyclic Oxidation Behaviour of Nanostructured Cr Al Multilayer Coating on Superalloy Substrate

Part 3:

Advances in Metal Machining & Fabrication Techniques Processing of Self-lubricating Cutting Tool Material Laser Engraving Machine for Gravure Printing Copper Roller Using Ultrasonic Vibration for Increasing the Performance of Grinding Process of Fine Ceramics On the Influence of Processing Method: Hot Pressing versus Plasma Pressure Compaction on Microstructural Development and Hardness of Boron Carbide Samples Optimization and Modeling of Process Parameters in Ultrasonic Machining Process

Part 4:

Advances in Welding Processes Experience with Tantalum as Cathode Holder: Future Directions for Improvements The Influence of Tool Design in Governing the Mechanisms of Formation of a Friction-stir Weld Fabrication of Skin Stiffened Panels Made from High Strength Aluminum Alloys Using Friction Stir Welding and Friction Stir Spot Welding Microstructure Evolution during Friction Stir Welding of AA 2219 and Comparison with Gas Metal Arc Welded Joint

Part 5:

Metallic Foams Electrodeposited Nanocrystalline Hybrid Cellular Materials Lost Foam Casting of Magnesium Periodic Cellular Materials Synthesis and Mechanical Properties of Open-Celled Aluminium Foam

Part 6:

Microelectronic Materials: Fabrication and Analysis Microelectronic Materials in Integrated Circuits and Manufacturing – An Introduction Direct Wafer Bonding and Grinding Etch Back Method for Fabrication of Thick Silicon-on-Insulator (SOI) Substrate Fabrication of W-DLC Thin Films by HF-CVD Method Study of Conductivity, Carrier Concentration and Mobility with Multilayer ZnO Film Role of Octadecyltrichlorosilane on the Performance of Pentacene Based Organic Thin Film Transistor Three-Dimentional Model to Study the Tetragonal to Orthorhombic Structural Phase Transition in YBa2Cu3O7-d Nanocomposites of SiO2-PMMA for Optical Data Storage Metamaterials at Optical Frequencies Effect of Addition of Rhenium to Platinum as Electrocatalyst for Direct Ethanol Fuel Cell

Part 7:

Materials : Failure, Wear and Structural Analysis Failure Analysis and Structural Integrity Assessment of Some Nuclear Components—Understanding Material Behaviour Investigation of the Sliding of a Hard Indenter on a Soft Surface: Force and Morphology of Wear Residual Stress Development at the Onset

• Spread in 12 sections, this volume includes 84 peer-reviewed articles covering aspects related to processing and fabrication.
• A wide variety of materials has been covered, many of which are emerging.
• Each article has an abstract, introduction and conclusion apart from the paper per se.
• Contributed by eminent academicians